Add a calibration profile

Share measured results so others can print better. No account needed.

Anyone can submit. Profiles go live on this site immediately.

Required: nozzle temperature range, calibrated nozzle diameter, tested bed temperature. If you used an active chamber heater, also enter the chamber set temperature.

Filament

Brand

Material

Product

Colour / variant

Printer and nozzle

Printer brand

Printer model

Calibrated nozzle diameter (mm)

Temperatures you tested

Nozzle temp min (°C)Nozzle temp max (°C)Tested bed temp (°C)Active chamber heater was used

Optional

Add measured values when you have them. Leave blank if unknown — required fields above are enough to publish.

Your name or handle (optional)Profile title (optional)

Print temperatures (optional)

Nozzle temp first layer (°C)Nozzle temp other layers (°C)Bed temp first layer (°C)Bed temp other layers (°C)

Extrusion (optional)

Flow ratioPressure advance / PAMax volumetric flow (mm³/s)Min volumetric flow (mm³/s)

Cooling (optional)

Fan min (%)Fan max (%)Bridge fan (%)Fan off for first layers

Filament dimensions (optional)

Filament diameter (mm)Density (g/cm³)Shrinkage XY (%)Shrinkage Z (%)

Retraction (optional)

Retraction distance (mm)Retraction speed (mm/s)Notes (optional)

I accept the contribution terms and understand my email stays private while the calibration may remain public if I later delete my account (anonymized attribution).

The filament catalog lives on this OpenFilament server. Add missing brands, products and colours here — corrections stay on OpenFilament, not on an external site.

Contribute · Back to home