IEMAI ASA Black
ASA
No SKU, EAN or GTIN on file for this colour yet.
Shop links are community-contributed and welcome — including a manufacturer’s own store. OpenFilament is not a marketplace.
Next steps
Catalog basics: Material yes, Nozzle °C yes, Bed °C yes, Colour yes. Default nozzle for profiles: 0.4 mm.
Manufacturer and catalog specs Brand first setting
Recommended ranges for this filament from the brand/catalog — a solid first setting, usually better than a slicer Generic PLA. Community calibrations refine flow, PA and printer-specific behaviour when someone has measured them.
- Nozzle °C
- 250 – 280 °C
- Bed °C
- 90 – 110 °C
- Chamber °C
- — – — °C
- Preheat °C
- — °C
- Drying
- — °C / — h
- Shrinkage XY % / Shrinkage Z %
- — / —
- Diameter
- 1.75 mm
- Density
- 1.07 g/cm³
- Min nozzle
- — mm
- Shore A / Shore D
- — / —
- Abrasive
- no
- Colour
- #000000
Community recommendation
Based on 2 measured samples
- Nozzle °C
- 270 °C (Low confidence)
- Bed °C
- 95 °C (Low confidence)
- Flow
- 0.92 (Low confidence)
- PA
- — (Not enough samples yet)
- Max VF
- — mm³/s
How this recommendation was calculated
- Based on 2 measured samples
- Median of measured samples after outlier exclusion. Confidence reflects agreement and evidence quality—not catalog or demo rows.
- Kept / outliers: 2 / 0
Calibration profiles
Best match
- IEMAI ASA Black
Creality K2 Plus · 0.4 mm · Community · Net score: 1
Measured community profiles
- IEMAI ASA Black
Creality K2 Plus · 0.4 mm · Community · Net score: 1
Starter profiles (manufacturer-based)
- IEMAI ASA — catalog starter 0.2 mm
Generic FFF · 0.2 mm · Starter · Net score: 0
- IEMAI ASA — catalog starter 0.25 mm
Generic FFF · 0.25 mm · Starter · Net score: 0
- IEMAI ASA — catalog starter 0.6 mm
Generic FFF · 0.6 mm · Starter · Net score: 0
- IEMAI ASA — catalog starter 0.8 mm
Generic FFF · 0.8 mm · Starter · Net score: 0
- IEMAI ASA — catalog starter 1 mm
Generic FFF · 1 mm · Starter · Net score: 0
- IEMAI ASA — catalog starter 0.4
Generic FFF · 0.4 mm · Starter · Net score: -1
Catalog identity is hosted on OpenFilament. Some rows were originally seeded from the Open Filament Database (MIT). openfilamentdatabase.org