Cookiecad ASA Dark Magic
ASA
No SKU, EAN or GTIN on file for this colour yet.
Shop links are community-contributed and welcome — including a manufacturer’s own store. OpenFilament is not a marketplace.
No shop links yet. Add the first one below.
Next steps
Catalog basics: Material yes, Nozzle °C yes, Bed °C yes, Colour yes. Default nozzle for profiles: 0.4 mm.
Manufacturer and catalog specs Brand first setting
Recommended ranges for this filament from the brand/catalog — a solid first setting, usually better than a slicer Generic PLA. Community calibrations refine flow, PA and printer-specific behaviour when someone has measured them.
- Nozzle °C
- 235 – 260 °C
- Bed °C
- 90 – 110 °C
- Chamber °C
- — – — °C
- Preheat °C
- — °C
- Drying
- — °C / — h
- Shrinkage XY % / Shrinkage Z %
- — / —
- Diameter
- 1.75 mm
- Density
- 1.07 g/cm³
- Min nozzle
- — mm
- Shore A / Shore D
- — / —
- Abrasive
- no
- Colour
- #2A3940
Community recommendation
No community measurements for this colour yet. Use the manufacturer specs and starter download below — they are already a strong first setting. Contribute a calibration when you have measured values.
Calibration profiles
Starter profiles (manufacturer-based)
- Cookiecad ASA — catalog starter 0.4
Generic FFF · 0.4 mm · Starter · Net score: 0
- Cookiecad ASA — catalog starter 0.2 mm
Generic FFF · 0.2 mm · Starter · Net score: 0
- Cookiecad ASA — catalog starter 0.25 mm
Generic FFF · 0.25 mm · Starter · Net score: 0
- Cookiecad ASA — catalog starter 0.6 mm
Generic FFF · 0.6 mm · Starter · Net score: 0
- Cookiecad ASA — catalog starter 0.8 mm
Generic FFF · 0.8 mm · Starter · Net score: 0
- Cookiecad ASA — catalog starter 1 mm
Generic FFF · 1 mm · Starter · Net score: 0
Starter profile from manufacturer data
Built from this filament’s brand/catalog temperatures plus a printer-class template. That is usually a stronger start than a slicer Generic PLA. Not community-measured yet — fine-tune before critical prints, and share your calibration when you can.
Catalog identity is hosted on OpenFilament. Some rows were originally seeded from the Open Filament Database (MIT). openfilamentdatabase.org